As the second largest, institutionally funded transport research institution in Europe, the German Aerospace Center (Deutsches Zentrum für Luft- and Raumfahrt/DLR) uses its transport program to address the big questions involving the future of mobility. BASF and its partner BNP Brinkmann are supporting the current research project “Next Generation Car” with a tailormade, light-weight composite based on natural fiber. “By using our Acrodur binder we were able, together with our partner BNP Brinkmann, to produce a composite material from renewable resources that meets the German Aerospace Center’s particularly high requirements for stability and weight”, explains Thorsten Habeck, Head of Business Management Fiber Bonding – Europe, Middle East & Africa at BASF.
The goal of the German Aerospace Center’s project “Next Generation Car (NGC)” is to promote the development of quiet, low-emission road vehicles with a high degree of automation and a wide range. It uses state-of-the-art technologies, among other things, for vehicle structure, engine and energy management. Light-weight construction is key when it comes to the development of innovative vehicle concepts: About two thirds of fuel consumption depend directly on the weight of the vehicle.
Design of the Safe Light Regional Vehicle (SLRV) concept car, part of DLR’s “Next Generation Car” project. Source: DLR
The contribution to the project made by BASF and its partner BNP Brinkmann concerned the “Safe Light Regional Vehicle” (SLRV), the smallest and lightest of the vehicle concepts developed as part of the NGC project. It combines a novel, metal sandwich type of construction with an innovative entry concept, a highly efficient hydrogen fuel cell engine and a novel car body to meet the demanding safety and weight (450 kg) requirements of the light-weight L7 vehicle category. The German Aerospace Center is going to give the public a first glimpse by presenting a prototype of the NGC SLRV at the Composites Europe trade fair that will take place in Stuttgart from September 10 to 12.
The interior floor of the NGC SLRV features light-weight composites made from natural fiber to protect the car body against mechanical deformation. “BASF and BNP Brinkmann were able to help us meet a difficult requirement asupplied us with tailormade molded parts that combine extremely low weight with high stability. This was essential for our NGC SLRV because, as the hood opens upward, people get into the car in an upright position, which leads to a particularly high point load on the car body in the footwell”, explains Michael Kriescher, responsible project leader at the Institute for Vehicle Concepts of the German Aerospace Center.
BASF helped produce the component by providing its experience with fiber bonding products. In the past, this expertise and the use of the Acrodur binder for natural fiber composites led to several high-performance light-weight components that were serially produced for the automotive industry.
High-performance light-weight component: The natural composite material based on natural fiber was produced by using BASF’s Acrodur binder.
Collaboration partner BNP Brinkmann, a specialist for multifaceted types of fleece that are used for semi-finished products by the automotive industry, supported the production of the component. “When we develop vative nical fleece fabrics, we are, as far as mobility is concerned, apart from light-weight, absorption and insulation solutions, particularly focusing on products made from renewable raw materials. Our experience and the particular characteristics of the Acrodur binder enabled us to produce the highly effective composite required by the German Aerospace Center by almost exclusively using natural fibers”, says Thomas Güthe, Managing Director of BNP Brinkmann.
More information about the “Next Generation Car” project of the German Aerospace Center can be found at https://verkehrsforschung.dlr.de/de/verkehrsforschung/strassenfahrzeuge/fahrzeugkonzepte
More information about the NGC Safe Light Regional Vehicle can be found at https://verkehrsforschung.dlr.de/de/projekte/ngc-slrv
More information about BASF’s Acrodur binder can be found at this website.
More information about BNP Brinkmann can be found at https://www.bnp-brinkmann.de
More information about Composites Europe 2019 can be found at https://www.composites-europe.com